Services & Products : Wheel Track Grinding

DEFINED WHEEL TRACK GRINDING

Our philosophy is to grind the least amount of concrete that is required to provide the maximum benefit for the end user.

The Laser Grinder® is easily adapted to grind all the necessary wheel paths.

Laser Grinding for a 3 Wheel VNA Truck
As a minimum requirement, any remedial grinding for a 3-wheeled VNA forklift truck must upgrade the floor flatness to the specified tolerances in the front (left & right) load wheel tracks. Grinding all 3 wheel paths ensures that each wheel of the VNA truck follows a similar profile, allowing faster operations and high-level pallet movements to be carried out safely.

The Laser Grinder^® is easily adapted to grind 2 or 3 wheel paths to any required flatness tolerance. The left and right tracks are performed simultaneously, in one pass along an aisle, and the centre track can be added by making a second pass.

Download Laser Grinding for a 3 Wheel VNA Truck information sheet

Laser Grinding For a 4 Wheel VNA Truck
Remedial grinding for a 4-wheeled VNA forklift truck should ensure that all 4 wheels are accommodated within the ground paths.

Download Laser Grinding For a 4 Wheel VNA Truck information sheet.

Click here to view Wheel Track Grinding Diagram

For both 3 or 4 wheeled VNA trucks, the ground paths are typically 300mm or 380mm wide, depending upon the width of the truck wheels. Wider ground paths can be achieved by making a further pass along the aisle.

The base of each ground path is flat across its width, with a sufficient clearance to each side of the truck wheel.